FZP II 11 x 8 M6/T/10 D40 PA

The specialist for thin ceramic façade panels.

Fördelar

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 10 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin ceramic and fine stoneware façade panels. Use in conjunction with clasps systems on façades or with other attachments.

Funktion

Use wet diamond drilling - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Mounting Strip 1 Picture

1 / 4

1
2
3
4

ETA Certification Document

pdf, ETA-11/0465

European Technical Assessment for fischer-Zykon-panel anchor FZP II T for "Royal Mosa stoneware" - Anchor for the rear fixing of facade panels made of ceramic plates "Royal Mosa stoneware" according to EN 14411:2016

Skapad den 2016-12-14

DOP - Declaration of Performance

pdf, DoP No. 0262

Declaration of Performance for fischer Zykon-panel anchor FZP II T (for Royal Mosa)

Skapad den 2021-01-11

ETA Certification Document

pdf, ETA-23/0756

European Technical Assessment for fischer-Zykon panel anchor FZP II T

Skapad den 2023-12-08

DOP - Declaration of Performance

pdf, DoP No. 0359

Declaration of Performance for fischer-Zykon-panel anchor FZP II T

Skapad den 2024-04-12

ETA-certifikat
Förankringsdjup ( h_ef )	8 mm
min. plattjocklek	12 mm
Typ	Dünnplattenanker
Totallängd ( l )	10,5 mm
Projection length	10 mm
Gänga ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Material	A4
Material hylsa	Polyamid
Färg	gul
Antal	250 Bit.
GTIN (EAN-Code)	4048962217742

FZP II 11 x 8 M6/T/10 D40 PA

Fördelar/produktbeskrivning

Ansökan och godkännande

Monteringsanvisningar

Tekniska data

Dokument för hämtning