Zykon-Panel anchor FZP II SO Carbon

Produktvarianter

Godkännanden/testrapporter

4 produktvariant(er)

min. plattjocklek

Förankringsdjup

Totallängd

Installerad ankarlängd

Återstående gänglängd

Gänga

Cylindrisk diameter

Underskärningsdiameter

System

Antal

GTIN (EAN-Code)

Förklaring = Tillgängligt tillstånd— = Behörighet inte tillgänglig

Visade 4 av 4 variant(er)

Fördelar

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Funktion

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP II SO Carbon - stand-off

1 / 4